Lancaster Pump 2-2LSL5009-2
Lancaster Pump 2-2LSL5009-2
Hover to zoom
1 Of 5
Lancaster Pump 2LSL5009-2 - 1/2 HP 7 GPM Deep Well Submersible Pump w/ SS Disc & Motor Sup. (2-Wire 230V)
Model: 2-2LSL5009-2
5.0 out of 55.0 out of 55.0 out of 55.0 out of 55.0 out of 5
Number of Reviews(1)
Write a Review
Q&A (3)
$475.00
Free Shipping
  Learn More About Free Freight
Free Shipping
*This product qualifies for Free Shipping anywhere in the contiguous US. Accessories may ship separately. Items over 100lbs shipped via semi-truck, be sure to select "Lift Gate" to lower the product to the ground curbside. Remote area surcharges may apply, see our full shipping policy for more details.
Factory-Direct
Ships in 2-5 Business Days
Factory items ship direct from the manufacturer. Shipping times vary.
Shipping to60601
Shipping Details
*We currently CANNOT ship this product to California or any destination outside of the United States

Share
  • Product Description
  • 1
    Reviews
  • 3
    Product Q&A
  • Recommended Accessories
  • How-To Articles
  • Manuals
Product Description
+−

Inlet Size
N/A
Style
Deep Well
GPM
7
Gallons
Inlet Size
N/A
Style
Deep Well
GPM
7 Gallons
Features
Features
  • SURVIVOR L-Series 7 GPM 4" Sub. Well Pump (2-Wire 230V)
  • For 4" I.D. or + Wells (<300'); Two-Wire Starting - No Control Box Req
  • 1/2 HP Lancaster HYDRO-FORCE Encapsulated Sub. Motor
  • Continuous duty rated, Induction run design w/ built-in starter
  • Stainless Steel Motor Casing & Splined Shaft End
  • Hermetically sealed, permanently lubricated, for greater heat exchange
  • Built-In Lighting Arrestors & Automatic Reset Overload
  • Provides surge and overhead protection for increased protection
  • 1.25" Stainless Steel Discharge Head, Motor & Cable Support
  • Superior strength and corrosion resistance for maximum life
  • Field replaceable fluted internal check valve & molded jug handles
  • Balanced Teflon® Impregnated Thermoplastic Impellers
  • Reduces overall friction to maximize water flow
  • Fully-Enclosed Thermoplastic Diffusers & Stage Plates w/ SS Wear Surfaces
  • Each stage has separate comp. thrust washer for added protection
  • Heavy wall, High Quality SS Pump Casing & SS Intake Screen
  • Sized inside for perfect stage alignment wouldn't snap off during install
  • Stainless Steel Hex Shaft w/ Slotted End For Test Turning
  • Polyurethane bearing (top/end motor shaft) for wear resistance
  • 3-Year Limited Warranty
Specifications
Motor
Voltage
240 Volt
Running Amps
6.4
Wire
2-Wire
Pump
Gallons Per Minute
7 Gallons
Outlet Diameter
1-1/4"
Pump Head Material
Stainless Steel
Housing Material
Stainless Steel
Impeller Material
Plastic
Maximum PSI
128
Total Head Lift
300 Feet
Submersible
Yes
Engine
Continuous Operation
Yes
Horsepower
0.5 hp
Overview
Weight
27.1 Pounds
Consumer Warranty
3 Years
Product Length
24.57 Inches
Product Width
3.81 Inches

Inlet Size
N/A
Style
Deep Well
GPM
7
Gallons
Inlet Size
N/A
Style
Deep Well
GPM
7 Gallons
Features
Features
  • SURVIVOR L-Series 7 GPM 4" Sub. Well Pump (2-Wire 230V)
  • For 4" I.D. or + Wells (<300'); Two-Wire Starting - No Control Box Req
  • 1/2 HP Lancaster HYDRO-FORCE Encapsulated Sub. Motor
  • Continuous duty rated, Induction run design w/ built-in starter
  • Stainless Steel Motor Casing & Splined Shaft End
  • Hermetically sealed, permanently lubricated, for greater heat exchange
  • Built-In Lighting Arrestors & Automatic Reset Overload
  • Provides surge and overhead protection for increased protection
  • 1.25" Stainless Steel Discharge Head, Motor & Cable Support
  • Superior strength and corrosion resistance for maximum life
  • Field replaceable fluted internal check valve & molded jug handles
  • Balanced Teflon® Impregnated Thermoplastic Impellers
  • Reduces overall friction to maximize water flow
  • Fully-Enclosed Thermoplastic Diffusers & Stage Plates w/ SS Wear Surfaces
  • Each stage has separate comp. thrust washer for added protection
  • Heavy wall, High Quality SS Pump Casing & SS Intake Screen
  • Sized inside for perfect stage alignment wouldn't snap off during install
  • Stainless Steel Hex Shaft w/ Slotted End For Test Turning
  • Polyurethane bearing (top/end motor shaft) for wear resistance
  • 3-Year Limited Warranty
Specifications
Motor
Voltage
240 Volt
Running Amps
6.4
Wire
2-Wire
Pump
Gallons Per Minute
7 Gallons
Outlet Diameter
1-1/4"
Pump Head Material
Stainless Steel
Housing Material
Stainless Steel
Impeller Material
Plastic
Maximum PSI
128
Total Head Lift
300 Feet
Submersible
Yes
Engine
Continuous Operation
Yes
Horsepower
0.5 hp
Overview
Weight
27.1 Pounds
Consumer Warranty
3 Years
Product Length
24.57 Inches
Product Width
3.81 Inches
Product Specs
+−
Specifications
Motor
Voltage
240 Volt
Running Amps
6.4
Wire
2-Wire
Pump
Gallons Per Minute
7 Gallons
Outlet Diameter
1-1/4"
Pump Head Material
Stainless Steel
Housing Material
Stainless Steel
Impeller Material
Plastic
Maximum PSI
128
Total Head Lift
300 Feet
Submersible
Yes
Engine
Continuous Operation
Yes
Horsepower
0.5 hp
Overview
Weight
27.1 Pounds
Consumer Warranty
3 Years
Product Length
24.57 Inches
Product Width
3.81 Inches
Reviews
5.0 out of 55.0 out of 55.0 out of 55.0 out of 55.0 out of 5
(1)
+−
Lancaster Pump 2-2LSL5009-2 Reviews & Ratings
Product Q&A
(3)
+−
Search Product Q&A's Answered by Jim, the Water Pump Expert
icon-social-fb1
+−
Where is the motor manufactured?
John B. 
from Pennsylvania 
April 19, 2018
Answer
Most, if not all Lancaster deep well pumps listed on our website have the Hydro-Force motor which is built in Italy. They do also offer most of them with a Franklin motor which would be available as a special order.
Was this answer helpful?
Yes
Thumbs Up Icon
2
No
Thumbs Down Icon
0
+−
What size wire is required for this pump?
Warren 
from New York 
March 22, 2017
Answer
These pumps include about 12"-15" wire leads off the pump. They do NOT include a waterproof splice kit, so this is something you would need to purchase locally. Gauge is determined based on pump HP, voltage, and total length of wire required. This will tell you, based on National Electric Code and your local code, what gauge wire you will need. Per the Installation Instructions: "determine the depth of the pump in the well in order to purchase electrical cable of sufficient gauge and length to reach from pump motor to electrical power supply. Properly sized copper wire from service to motor will avoid over-heating wire and excessive voltage drop at the motor."
Was this answer helpful?
Yes
Thumbs Up Icon
0
No
Thumbs Down Icon
0
+−
Do I need to buy a check valve or anything else with this pump?
Jim 
from Connecticut 
March 03, 2017
Answer
These pumps do include a built-in check valve. If however, your total vertical head lift exceeds 100 feet, you would need to install an additional check valve at every 100 foot level. You can also check out the Pump Manual for additional accessories that you may need to purchase. Please note that we only provide the pump. Any additional accessories needed for installation should be accessible at your local hardware or big box store.
Was this answer helpful?
Yes
Thumbs Up Icon
1
No
Thumbs Down Icon
1
Recommended Accessories
+−
Expert Recommended Accessories Hand Picked By Our Expert Jim
icon-social-fb1
Required Accessories Add All Required
Optional Accessories
How-To Articles
+−
Manuals
+−
 
 
Media Gallery
Lancaster Pump 2LSL5009-2 - 1/2 HP 7 GPM Deep Well Submersible Pump w/ SS Disc & Motor Sup. (2-Wire 230V)
Lancaster Pump 2-2LSL5009-2
+
–
↻Reset View
×
Customer Review Images