Apache Hose 4" x 100' PVC Lay Flat Discharge Hose

Yes it does Jake, HOWEVER, the male is NOT a fire thread, it is a STRAIGHT NPT. This is a pipe thread but straight (not tapered like people would normally think of). They are made this way to be able to hook up to the female fittings (like on the other end of the hose) by using a gasket instead of a tapered pipe thread that requires pipe dope and considerable torqueing to get a seal. You may need to look at the pump (if the pump has female threads is a tapered thread male end on a hose. Most people have a short double male tapered pipe nipple in the pump and hook the female end of the hose up to that. The female end of the hose (while still a straight thread) will work with a tapered male or a straight male. The male end will not screw into a tapered female. So you would either need a King Nipple x barb attached to the hose or a double threaded pipe nipple from the plumbing department to screw into the pump and hook it onto the female end of the hose.

All of our Apache hoses come with threaded NPT fittings.

Thank you for your interest in Water Pumps Direct. The Apache 4" X 100' PVC Lay Flat hose will handle a max pressure of 55PSI.